Siete qui : PRODOTTI > SPL > Amplificatori cuffie > Phonitor xe

Questo sito utilizza cookies e tecnologie simili. Se non si modificano le impostazioni del browser, l'utente accetta. Per saperne di piu'

Approvo

Phonitor xe

Headphone Amplifier

 

Phonitor xe

 

The Phonitor xe is the ultimate standalone device for headphone enthusiasts who want the perfect solution without any compromises

The Phonitor xe is the first Phonitor headphone amplifier which can be equipped with the brand-new DAC768.

This optional internal Uber-DAC qualifies the Phonitor xe to convert with outstanding sonic performance.

An audio resolution of 32 bits and PCM sample rates up to 768kHz as well as DSD – up to DSD256 – are the impressive numbers.

The analog side of the converter also is top-notch: like in the Director DAC & Preamplifier. the active Lowpass-Filter is built in a 120V-Voltair-Technology design.

Ph xe Rear 1200x454
Phonitor is a success story. Designed and developed for the sound engineer to be able to mix on headphones Phonitor soon found a fan base among Hi-Fi aficionados around the world as they realized that they can enjoy 'their' music on headphones the way it was intended – without the super-stereo effect and with natural crosstalk.

For us it was only logical to develop optimized Hi-Fi versions for those who enjoy listening to music on headphones.

In contrast to the Phonitor x the Phonitor xe renounces the preamplifier function and unlike the Phonitor e it features the nice VU meters and the fully featured Phonitor Matrix.

Thus the Phonitor xe is the flagship amplifier for headphone enthusiasts.

 



    Specifiche tecniche:
     
     

    XLR Input

    • Neutrik XLR, balanced, Pin 2 = (+)
    • Impedance: ca. 20 kohms
    • CMR: -82 dBu (at 1 kHz)
    • Max. Input Level: +32.5 dBu
     
     

    RCA Input

    • RCA, unbalanced (single-ended)
    • Impedance: ca. 10 kohms
    • Max. Input Level: +32.5 dBu
     
     

    Digital Inputs (optional)

    • Coaxial SPDIF (RCA) - sample rates PCM (kHz): 44.1, 48, 88.2, 96, 176.4, 192
    • Optical TOSLINK (F06) – sample rates PCM (kHz): 44.1, 48, 88.2, 96
    • USB (B) – PCM sample rates (kHz): 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384, 705.6, 768
    • USB (B) – DSD 1, 2 and 4 (DoP)
    • AES – sample rates PCM (kHz): 44.1, 48, 88.2, 96, 176.4, 192
     
     

    Balanced Headphone Output

    • Neutrik 4-pin XLR connector
    • Pin wiring: 1= L (+), 2= L (-), 3= R (+), 4= R (-)
    • Impedance: 0.36 ohms
    • Damping Factor: 180 @ 40 ohms
    • Frequency Range: 10 Hz to 300 kHz ( -3 dB)
    • Crosstalk at 1kHz: -90 dB
    • THD & N: 0.00082 % (at 0 dBu, 1kHz, 100 kohms load)
    • Noise (A-weighted): -98 dBu
    • Dynamic Range: 130.5 dB
     
     

    Unbalanced Headphone Output

    • 6.35 mm TRS connector
    • Pin wiring: Tip = Left, Ring = Right, Sleeve = GND
    • Impedance: 0.18 ohm
    • Attenuation Factor: 180 @ 40 ohms
    • Frequency Range: 10 Hz to 300 kHz ( -3 dB)
    • Crosstalk at 1kHz: -90 dB
    • THD & N: 0.00082% (at 0 dBu, 1 kHz, 100 kohms load)
    • Noise (A-weighted): -103 dB
    • Dynamic Range: 135.5 dB
     
     

    Max. Output Power (at +30 dBu @ 1 kHz)

    • 2 x 1 W at 600 Ohm impedance
    • 2 x 2 W at 300 Ohm impedance
    • 2x 3.7 W at 120 Ohm impedance
    • 2x 2.9 W at 47 Ohm impedance
    • 2x 2.7 W at 32 Ohm impedance
     
     

    Internal Operating Voltages

    • Analog: +/- 60 V
    • Digital: + 5 V and + 3,3 V (optional DAC768)
     
     

    Power Supply

    • Mains voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz
    • Fuses: 230 V: T 500 mA; 115 V: T 1 A
    • Power consumption: max 40 VA
    • Stand-by power consumption: 0.7 W
     
     

    Dimensions (incl. feet)

    • 278 mm W x 100 mm H x 330mm D
    • 10.95 in W x 3.94 in H x 12.99 in D
     
     

    Weight

    • 11.24 lbs (5,1 kg), unit only
    • 13.78 lbs (6,25 kg), shipping


    0 dBu = 0.775V. Specifications subject to change without notice.