Questo sito utilizza cookies e tecnologie simili. Se non si modificano le impostazioni del browser, l'utente accetta. Per saperne di piu'

Approvo

Creon

 

 

 

Creon è un hardware che comprende le funzionalità di interfaccia audio USB e di monitor controller stand-alone.

 

La sua versatilità lo rende sia un'eccellente complemento alla tua Digital Audio Workstation software, sia un'ottima apparecchiatura analogica indipendente.

 

Non devi fare altro che connettere uno strumento e suonare, collegare un microfono e cantare. Puoi mixare un segnale esterno con il playback o gestire tracce da qualsiasi sorgente...

 

Ti piace quello che stai suonando? Lancia la tua DAW e registralo!

 

 

 

 

 

 

 

 

 

 

 

Recording Channels

  • 2 ingressi microfonici (XLR)
  • 1 ingresso instrument (TS)
  • 2 ingressi linea bilanciati (TRS)

Registrazione di due canali in simultanea.

 

Playback Channels

  • 2 canali tramite USB (DAW 1|2)

 

Analog Inputs (Sources)

  • 2 ingressi linea TRS (bilanciati)
  • 2 ingressi linea RCA (sbilanciati)

 

Digital Input

  • 1 USB

 

Analog Output

  • Speaker | Main Out (2x XLR, balanced)
  • 1 headphone socket (TRS)

 

Digital Output

  • 1 USB

 

Hardware

  • USB 2 audio system
  • High-performance, 32 bit microcontroller
  • 24 bit audio processing
  • 2 ingressi e 2 uscite, fino a 192 kHz
  • Sample rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz o 192kHz
  • Fixed master clock per jitter bassissimo
  • audio 1:1 reale, nessuna conversione di sample rate o clock recovery

 

Software

  • Windows XP/7/8/10, Mac OS X 10.6 o successivo, iOS 6 e successivi
  • Nessun driver richiesto per Mac
  • USB Audio Class 2.0 compliance (asynchronous mode)
  • Low-latency Windows ASIO e WDM driver
  • Multi-application mode, ASIO e/o WDM playback simultanei
  • Driver feedback synchronization ad hardware clock
  • ASIO control panel per Windows

 

 

  • Specifiche tecniche:

    Input Sockets

     

    • Mic Inputs 1, 2: XLR
    • Line Inputs 1, 2: 6.3mm TRS
    • Instrument Input: 6.3mm TS
    • Source 1 Input: 6.3mm TRS
    • Source 2 Input: RCA

     

    Output Sockets

     

    • Speaker Out | Main Out: XLR
    • Headphone Output: 6.3mm TRS

     

    Input Impedances

     

    • Microphone Input: 10kOhm
    • Line Inputs: 10kOhm unbalanced, 20kOhm balanced
    • Instrument Input: 1.1MOhm
    • Source 1 Input: 10kOhm unbalanced, 20kOhm balanced
    • Source 2 Input: 10kOhm

     

    Output Impedances

     

    • Speaker Out | Main Out: 75Ohm unbalanced, 150Ohm balanced
    • Headphone Output: 33Ohm

     

    Maximum Input Levels

     

    • Mic Inputs: +14.5dBu (Gain fully left)
    • Line Inputs: +22.5dBu
    • Instrument Input: +22dBu (Gain fully left)
    • Source 1 Input: +22.5dBu
    • Source 2 Input: +22.5dBu

     

    Maximum Output Levels

     

    • Speaker Out | Main Out: +22.5dBu

     

    Microphone Preamplifiers (balanced, XLR)

     

    • Gain Control: +7dB - +60dB
    • Frequency Response: 10Hz - >200kHz
    • Noise (unweighted, 30dB gain, input termination 150Ohm): -90dBu
    • Equivalent Input Noise: -128dBu
    • Common Mode Rejection Ratio: < -70dBu
    • THD+N Ratio@1kHz (30dB gain, input termination 150Ohm): 0.003%
    • High Pass Filter: fg = 80Hz, 6dB/Oct.
    • Phantom Power: 48Volt

     

    Instrument Input (Unbalanced, 6.3mm TS)

     

    • Gain Control: -6dB - +31dB
    • Frequency Response: 10Hz - >200kHz
    • Noise (unweighted, unity gain, input termination 100kOhm): -85dBu
    • THD+N Ratio@1kHz (unity gain, input termination 100kOhm): 0.005%

     

    Line Input (balanced, 6.3mm TRS)

     

    • Frequency Response: 10Hz - >200kHz
    • Noise (unweighted, unity gain, input termination 600Ohm): -95dBu
    • Common Mode Rejection ratio: < -60dBu
    • THD+N Ratio@1kHz (unity gain, input termination 600Ohm): 0.002%

     

    Source 1 Input (balanced, 6.3mm TRS)

     

    • Frequency Response: 10Hz - >200kHz
    • Noise (unweighted, unity gain, input termination 600Ohm): -95dBu
    • Common Mode Rejection ratio: < -60dBu
    • THD+N Ratio@1kHz (unity gain, input termination 600Ohm): 0.002%

     

    Source 2 Input (unbalanced, RCA)

     

    • Frequency Response: 10Hz - >200kHz
    • Noise (unweighted, unity gain, input termination 600Ohm): -90dBu
    • Noise (unweighted, -10dBV, input termination 600Ohm): -85dBu
    • THD+N Ratio@1kHz (unity gain, input termination 600Ohm): 0.003%
    • THD+N Ratio@1kHz (-10dBV, input termination 600Ohm): 0.003%

     

    Headphone Outputs (stereo, 6.3mm TRS)

     

    • Frequency Response: 10Hz - >200kHz
    • Power@0dBu: 47Ohm load: 13mW/300Ohm load: 1,7mW/600Ohm load: 1.0mW
    • Power max: 47Ohm load: 670mW/300Ohm load: 265mW/600Ohm load: 150mW
    • THD+N Ratio@1kHz (Power@0dBu): 47Ohm: 0.0026%/300Ohm: 0.002%/600Ohm: 0.002%

     

    AD Conversion (ASIO direct)

     

    Noisefloor (A-weighted)

    • 44.1/48kHz: -113dB
    • 88.2/96kHz: -108dB

    Dynamic range

    • 44.1/48kHz: 128dB
    • 88.2/96kHz: 123dB

    THD+N ratio @ 1kHz (-1dBFS):

    • 44.1/48kHz: 0.002%
    • 88.2/96kHz: 0.0025%

    0dBFS = +15dBu

     

    DA Conversion (ASIO to Speaker Output)

     

    Noisefloor (A-weighted)

    • 44.1/48kHz: -93dB
    • 88.2/96kHz: -92dB

    Dynamic range

    • 44.1/48kHz: 108dB
    • 88.2/96kHz: 107dB

    THD+N ratio @ 1kHz (-1dBFS):

    • 44.1/48kHz: 0.003%
    • 88.2/96kHz: 0.004%

     

    Power Supply 

     

    • External Power Supply, Input 100–240V AC/50–60 Hz; Output 12V DC/1,5A
    • Internal Power Supplies: Audio: +/-17V, Digital: +5V and +3,3V
    • Power Consumption: 16.8 Watt

     

    Dimensioni e peso

     

    • A x L x P: 67x260x175 cm

    • Peso: 2,0 kg

     

    0dBu = 0.775V.

     

    Subject to change without notice.